Mobile Phone Homepage

How Bluetooth Works

In the modern age of digital electronics, wireless access to different devices are inevitable. If you buy Smartphone you’ll notice that it uses this same kind of technology, but how does this work? Here is an explanation of the whole bluetooth mystery.

Bluetooth devices will normally operate at 2.4 GHZ
in the license free, globally available ISM radio
band. The advantage to this band includes worldwide
availability and compatibility. A disadvantage to
this however, is that the devices must share this
band with other RF emitters. This includes
automobile security systems, other wireless devices,
and other noise sources, such as microwaves.

To overcome this challenge, Bluetooth employs a
fast frequency hopping scheme and therefore uses
shorter packets than other standards within the
ISM band. This scheme helps to make Bluetooth
communication more robust and more secure.

Frequency hopping
Frequency hopping is basically jumping from frequency
to frequency within the ISM radio band. After a
bluetooth device sends or receives a packet, it
and the device (or devices) it’s communicating with
hop to another frequency before the next packet is
sent. This scheme offers three advantages:
1. Allows Bluetooth devices to use the
entirety of the available ISM band, while never
transmitting from a fixed frequency for more than a
short period of time. This helps insure that
Bluetooth conforms to the ISM restrictions on the
transmission quantity per frequency.
2. Ensures that any interference won’t
last long. Any packet that doesn’t arrive safely
to its destination can be resent to the next
frequency.
3. Provides a base level of security as
it’s very hard for an eavesdropping device to predict
which frequency the Bluetooth devices will use
next.

The connected devices however, must agree upon the
frequency they will use next. The specification
in Bluetooth ensures this in two ways. First, it
defines a master and slave type relationship between
bluetooth devices. Next, it specifies an algorithm
that uses device specific information when
calculating the frequency hop sequences.

A Bluetooth device that operates in master mode can
communicate with up to seven devices that are set in
slave mode. To each of the slaves, the master
Bluetooth device will send its own unique address
and the value of its own internal clock. The
information sent is then used to calculate the
frequency hop sequences.

Because the master device and each of the slave
devices use the same algorithm with the same initial
input, the connected devices will always arrive
together at the next frequency that they have agreed
upon.

As a replacement for cable technology, it’s no
wonder that Bluetooth devices are usually battery
powered, such as wireless mice and battery powered
cell phones. To conserve the power, most devices
operate in low power. This helps to give Bluetooth
devices a range of around 5 – 10 meters.

This range is far enough for wireless communication
but close enough to avoid drawing too much power
from the power source of the device.

The networking standards of Bluetooth will transmit
data via low power radio frequency. Bluetooth
communicates on a 2.45 GHz frequency. This very
band of frequency has been set aside by international
agreement for the use of industrial and medical
devices.

Many devices that you already known and use take
advantage of this frequency band. Garage door
openers, baby monitors, and the next generation of
mobile phones all use this frequency within the ISM
band. Ensuring that Bluetooth and the other
devices don’t interfere with each other is a crucial
part of the design process.

One of the ways Bluetooth will avoid interfering
with other electronic devices is by sending out
weak signals of around 1 mw. In comparison, even
the most powerful of cell phones can transmit a
signal of 3 watts.

The low power signals will limit the range of a
Bluetooth device to around 32 feet, which cut the
chances of interference between your computer and
other electronic devices. Even though it has low
power, Bluetooth doesn’t require a line of sight
between the communicating devices. The walls in
your home won’t stop the signal, making it great
for rooms throughout the house.

Bluetooth can connect 8 devices at the same time.
With each of those devices on the same radius,
you may think they would interfere with each
other, although it’s very unlikely. Bluetooth
utilizes a technique known as low frequency
hopping, which makes it harder for more than
one device to transmit on the same frequency
at the same time.

With this technique, a device will use 79
individual, randomly chosen frequencies within
a designated range, which change from one another
on a regular basis.

In the case of Bluetooth, the transmitters will
change frequency 1,600 times or more every
second, meaning that more devices can make full
use of the radio spectrum. Since every
transmitter of Bluetooth will use spread spectrum
automatically, it’s very unlikely that two
transmitters will be on the same frequency at the
exact same time.

When the Bluetooth devices come within close range
of each other, an electronic conversation will
occur to determine whether or not they have
data to share or whether one needs to take total
control. The user doesn’t have any buttons to
press or commands to give – as the conversation
will occur automatically.

Once the conversation has occured, the devices
will form a network. Bluetooth devices will
create a PAN (Personal Area Network) or piconet
that may fill a room. Once the piconet has been
established, the devices will randomly hop in
frequencies.

The amazing technology of Bluetooth presents a great
way of exchanging data between two wireless devices.
Unlike telephones, there are no wires or messy
leads to worry about. You can enjoy wireless
communications with short distances of up to thirty
feet.

Bluetooth also offers interoperability, meaning that
you can use your portable Bluetooth device to connect
with existing Bluetooth points. This way, you won’t
have to carry a data lead or CDs of drivers around
with you everywhere you go. You can enjoy the best
of wireless without having to worry about installing
your software.

With today’s Bluetooth, you can use your PDA and cell
phone to surf the net or check emails as you travel.
If you are in the business field, this can be very
beneficial, especially if you like to check your
email throughout the day. Bluetooth will enable you
to check your email no matter where you are – which
is great news for those who like to travel.

Bluetooth will also enable to you to transfer files
as well, such as MP3 and photo to and from your mobile
device. Bluetooth dominates the world of short range
wireless, enabling you to do more than you may
have thought possible.

One of the best things to Bluetooth and something
everyone loves is the wireless headset. Bluetooth
offers wire free headsets for your cell phone or
computer, which is great for those who like to walk
around or talk on the phone in the car, without
having to worry about your hands getting in the way.

To make things even better, you can use a Bluetooth
GPS device for satellite navigation on your PDA,
laptop, or mobile. If you travel – this can be
really great to have.

Bluetooth devices will normally operate at 2.4 GHZ
in the license free, globally available ISM radio
band. The advantage to this band includes worldwide
availability and compatibility. A disadvantage to
this however, is that the devices must share this
band with other RF emitters. This includes
automobile security systems, other wireless devices,
and other noise sources, such as microwaves.

To overcome this challenge, Bluetooth employs a
fast frequency hopping scheme and therefore uses
shorter packets than other standards within the
ISM band. This scheme helps to make Bluetooth
communication more robust and more secure.

Frequency hopping
Frequency hopping is basically jumping from frequency
to frequency within the ISM radio band. After a
bluetooth device sends or receives a packet, it
and the device (or devices) it’s communicating with
hop to another frequency before the next packet is
sent. This scheme offers three advantages:
1. Allows Bluetooth devices to use the
entirety of the available ISM band, while never
transmitting from a fixed frequency for more than a
short period of time. This helps insure that
Bluetooth conforms to the ISM restrictions on the
transmission quantity per frequency.
2. Ensures that any interference won’t
last long. Any packet that doesn’t arrive safely
to its destination can be resent to the next
frequency.
3. Provides a base level of security as
it’s very hard for an eavesdropping device to predict
which frequency the Bluetooth devices will use
next.

The connected devices however, must agree upon the
frequency they will use next. The specification
in Bluetooth ensures this in two ways. First, it
defines a master and slave type relationship between
bluetooth devices. Next, it specifies an algorithm
that uses device specific information when
calculating the frequency hop sequences.

A Bluetooth device that operates in master mode can
communicate with up to seven devices that are set in
slave mode. To each of the slaves, the master
Bluetooth device will send its own unique address
and the value of its own internal clock. The
information sent is then used to calculate the
frequency hop sequences.

Because the master device and each of the slave
devices use the same algorithm with the same initial
input, the connected devices will always arrive
together at the next frequency that they have agreed
upon.

As a replacement for cable technology, it’s no
wonder that Bluetooth devices are usually battery
powered, such as wireless mice and battery powered
cell phones. To conserve the power, most devices
operate in low power. This helps to give Bluetooth
devices a range of around 5 – 10 meters.

This range is far enough for wireless communication
but close enough to avoid drawing too much power
from the power source of the device.

The technology of Bluetooth is nothing new, but in
many respects it can still seem like more of a buzz
word rather than an accepted technology. You may
see the ads for Bluetooth enabled devices, although
you still may be wondering what it is.

Capabilities
The Bluetooth definition is a wireless technology
that is a worldwide specification for a small form
factor, low cost solution that will provide link
between mobile devices and other electronic
devices.

Similiar to 802.11 b/g wireless and many cordless
telephone systems, Bluetooth operates on 2.4 GHz
radio signals. The 2.4 GHz band seems to be a bit
crowded, with interferences between the devices a
bit hard to avoid. Telephones are now being offered
at the 5.8 GHz frequency band, which will help to
remedy this.

The technical specifications of Bluetooth will
indicate a maximum transfer rate of 723 kbps with
a range of 65 – 328 feet, all depending on the
class of that particular device. The speed is a
fraction of what is offered by wireless standards,
so it’s obvious that Bluetooth doesn’t really
pose a threat to replacing your wireless network.

Applications
There are numerous products that will take advantage
of Bluetooth capabilities, such as laptops, PDAs,
headphones, and even wireless printer adapters.

A lot of laptops out there will include an onboard
Bluetooth adapter which allows the system to
connect to any Bluetooth device right out of the
box. For computers that don’t have an adaptor
built right in, there are several USB adaptors
available for Bluetooth.

For an awesome technology, Bluetooth is actually
hard to compete with. For short range wireless,
Bluetooth is easily one of the best. The standard
for Bluetooth keeps getting better and better,
making it a wireless technology that will be around
for years and years to come.

These days, all communication technology faces the
issue of privacy and identity theft, with Bluetooth
being no exception. Almost everyone knows that email
services and networks require security. What users
of Bluetooth need to realize is that Bluetooth also
requires security measures as well.

The good news for Bluetooth users is that the
security scares, like most scares, are normally over
dramatized and blown entirely out of proportion. The
truth being told, these issues are easy to manage,
with various measures already in place to provide
security for Bluetooth technology.

It’s true that there has been some Bluetooth phones
that have been hacked into. Most devices that are
hacked into are normally those that don’t have any
type of security at all.

According to Bluetooth specialists, in order to hack
into a Bluetooth device, the hacker must:
1. Force two paired devices to break their
connection.
2. Steal the packets that are used to
resend the pin.
3. Decode the pin.

Of course, the hacker must also be within range of
the device, and using very expensive developer type
equipment. Most specialists recommend that you
have a longer pin, with 8 digits being recommended.

Fundamentals of security
The “pairing process” is one of the most basic levels
of security for Bluetooth devices. Pairing, is
two or more Bluetooth devices that recognize each
other by the profiles they share – in most cases
they both must enter the same pin.

The core specifications for Bluetooth use an
encryption algorithm, which is completely and entirely
secure. Once the devices pair with each other,
they too become entirely secure.

Until they have successfully paired, the Bluetooth
devices won’t communicate with each other. Due to
this pairing process and the fact that it is short
range – Bluetooth technology is considered to be
secure.

As the news has indicated, experienced hackers
have developed ways to get around this level of
basic security. There are ways to get around this
threat, as you can install software to prevent
hackers from getting in.

With Bluetooth becoming more and more popular, it’s
really no wonder that security is always in
question. As Bluetooth gets bigger and better,
security will always be something that no one
really takes lightly.

If you’ve been concerned about Bluetooth security
in the past, rest assured that newer devices will
offer bigger and better security. Preventing
hackers from getting in is something every owner
is concerned about – and the manufacturer’s are
very aware.

Bluetooth Technology Is Likely To Be The Answer You Are Looking For!

Several large and well-known companies developed Bluetooth as an industry standard. The standard was introduced in order to specify how hand held devices, computers and other peripherals would communicate with one another without the need for cables. It uses short distance radio signals in order to generate communication between one device and another in close proximity. It is already widely used around the world in particular in bluetooth headsets, used for speaking on your cell phone when driving. However, data can be passed between any bluetooth devices within range.

Bluetooth is the simplest and most widely available technology of its kind. This means that manufacturers can build bluetooth-enabled devices quickly and effectively and pass this saving directly on to consumers. It is also extremely convenient and bluetooth devices are usually incredibly small. This is why it is used in hands free headsets for use with cell phones.

Because bluetooth is the industry standard, this means that it is widely accepted and regularly used by companies from all over the world for many different reasons. Because it is so easily accessible and the transfer of data from one bluetooth device to another is completely free it is the most popular option. It is also incredibly easy for consumers to use and in many cases it is simply a case of turning the bluetooth devices on and then sending the data as required.

Due to 128-bit encryption and adaptive frequency hopping, bluetooth is a secure method of transporting data over short distances. Whether you want to transfer files from your notebook to your computer or you want to talk on your cell phone while you are driving, bluetooth technology is likely to be the answer you are looking for. Businesses and individuals all around the world, use bluetooth on a regular basis.

Bluetooth Security

These days, all communication technology faces the
issue of privacy and identity theft, with Bluetooth
being no exception. Almost everyone knows that email
services and networks require security. What users
of Bluetooth need to realize is that Bluetooth also
requires security measures as well.

The good news for Bluetooth users is that the
security scares, like most scares, are normally over
dramatized and blown entirely out of proportion. The
truth being told, these issues are easy to manage,
with various measures already in place to provide
security for Bluetooth technology.

It’s true that there has been some Bluetooth phones
that have been hacked into. Most devices that are
hacked into are normally those that don’t have any
type of security at all.

According to Bluetooth specialists, in order to hack
into a Bluetooth device, the hacker must:
1. Force two paired devices to break their
connection.
2. Steal the packets that are used to
resend the pin.
3. Decode the pin.

Of course, the hacker must also be within range of
the device, and using very expensive developer type
equipment. Most specialists recommend that you
have a longer pin, with 8 digits being recommended.

Fundamentals of security
The “pairing process” is one of the most basic levels
of security for Bluetooth devices. Pairing, is
two or more Bluetooth devices that recognize each
other by the profiles they share – in most cases
they both must enter the same pin.

The core specifications for Bluetooth use an
encryption algorithm, which is completely and entirely
secure. Once the devices pair with each other,
they too become entirely secure.

Until they have successfully paired, the Bluetooth
devices won’t communicate with each other. Due to
this pairing process and the fact that it is short
range – Bluetooth technology is considered to be
secure.

As the news has indicated, experienced hackers
have developed ways to get around this level of
basic security. There are ways to get around this
threat, as you can install software to prevent
hackers from getting in.

With Bluetooth becoming more and more popular, it’s
really no wonder that security is always in
question. As Bluetooth gets bigger and better,
security will always be something that no one
really takes lightly.

If you’ve been concerned about Bluetooth security
in the past, rest assured that newer devices will
offer bigger and better security. Preventing
hackers from getting in is something every owner
is concerned about – and the manufacturer’s are
very aware.

Other wireless technology such as Garmin GPS utilizes complex wireless systems that let you know where you are, on any place in the world.